K2 blackpearl 0807 Update (4.8210.x.535)

  • 16 February 2021
  • 0 replies
  • 1 view

Userlevel 3
Badge +8
 

K2 blackpearl 0807 Update (4.8210.x.535)

KB000535

DOWNLOADS
DOWNLOADS
PRODUCT
K2 blackpearl 0807
BASED ON
K2 blackpearl 0807

SEE ALSO K2 blackpearl Downloads Page

LEGACY/ARCHIVED CONTENT
This article has been archived, and/or refers to legacy products, components or features. The content in this article is offered "as is" and will no longer be updated. Archived content is provided for reference purposes only. This content does not infer that the product, component or feature is supported, or that the product, component or feature will continue to function as described herein.

 

Introduction

KB000535 updates all K2 blackpearl 0807 version 4.8210.2.450 and 4.8210.3.0 installations with the latest product hotfixes, as detailed below. The installer will update K2 blackpearl 0807 32-bit and 64-bit installations.

 

 

Issues Resolved

The following issues have been fixed and are contained within this update:

KB000512 - Hotfix: Delegating a Worklist item causes the process to fail once the delegated user has actioned the Worklist item from their Worklist
KB000513 - Hotfix: After installing Update KB000450, an ‘Unable to compare values that is not of the same type’ error displays when using Line rules
KB000516 - Hotfix: An "Object must implement IConvertible” error occurs during process execution after update KB000525
KB000518 - Hotfix: Erroneous data is returned from dateTime and decimal fields set for data on demand

This update includes the hotfixes included in previous K2 blackpearl 0807 Updates, so there is no need to install the updates listed below as well. The following links are provided for reference to view the enhancements and resolved issues contained within the previous updates:

KB000483 - K2 blackpearl 0807 Update (4.8210.x.483)
KB000495 - K2 blackpearl 0807 Update (4.8210.x.495)
KB000505 - K2 blackpearl 0807 Update (4.8210.x.505)
KB000515 - K2 blackpearl 0807 Update (4.8210.x.515)
KB000525 - K2 blackpearl 0807 Update (4.8210.x.525)

 

 

Installation

K2 blackpearl 0807 Update (4.8210.x.535) is available as an independent installation package which can be found here: http://portal.k2.com/downloads/bp/default.aspx.

Installation Prerequsites

The following are prerequisites to K2 blackpearl 0807 4.8210.x.535 and must be installed prior to installing this update:

  • Full Installation: K2 blackpearl 0807 4.8210.3.0

    or
  • Upgrade: K2 blackpearl 0807 4.8210.2.450
 

Installation Steps

The K2 blackpearl 0807 Update (4.8210.x.535) installation package must be installed by running the K2 Update Manager (K2Setup.exe) found within the update package.

Note: This update package should be installed on all machines that have K2 components installed. The Configuration Manager will only be run for the K2 Server component. This update should be installed on machines running K2 blackpearl 0807 4.8210.2.450 or 4.8210.3.0

To install this package, follow the steps below:

    1. Welcome Screen
      The Welcome Screen introduces the K2 blackpearl Update Manager. An installation log will be created by default. Click Next to continue.
 
    1. Components to Update
      The Components to Update page lists the K2 Components that the update manager will update. Click Update to continue.
 
    1. K2 blackpearl Server
      The K2 blackpearl Server must be stopped for the duration of the patch. If the server is running a warning screen will appear requesting that the K2 blackpearl server be stopped.
 
    1. Reset IIS
      The K2 blackpearl Update Manager will request and perform a reset of IIS.
 
    1. Ready
      The K2 blackpearl Update Manager will install the update, and will show the progress of the update via the progress bars on the screen.
 
    1. Finished
      Once the update has completed installing, the wizard will show you the finished screen. A link to the log file that is created is available on this screen. Click Finish to close the installer.
 
  1. Configuration Manager
    After the K2 blackpearl Update Manager finishes, the K2 Configuration Manager will run and must be allowed to complete to fully install and configure the new update.
Note: If the K2 Configuration Manager does not complete successfully, the update will not be installed properly and your K2 blackpearl installation will not function correctly.
 

 

 

Components to Update

K2 blackpearl 0807 Update (4.8210.x.535) will update and configure the following components:

  • K2 Server
  • K2 Databases 
  • K2 for SharePoint
  • K2 Workspace

Please Note:

Configuration Files: When repairing or upgrading to K2 blackpearl 0807 Update (4.8210.x.535), all K2 configuration files will be overwritten. Any K2 blackpearl configuration file that has manually been altered will be overwritten in the upgrade. The K2 Installer will perform an automatic backup of the existing configuration files. The backup files must be compared after installation and the new configuration files manually changed to represent any previous modifications. The backup location is {K2 blackpearl}SetupConfigurationBackup

Database Snapshot: The database snapshot has been designed to create a new snapshot folder on every subsequent reconfigure after the initial installation of K2 blackpearl. These snapshots can be compared to the templates easily using a comparison tool. This feature is available from K2 blackpearl 0807 (4.8210.x.505) onwards. The snapshot can be found at the following example location which is determined by the date when the update was installed: {K2 blackpearl}ConfigurationScriptSnapshotsDate_x

Figure 1 - Database Snapshot

Compatibility Matrix: In the K2 blackpearl Compatibility matrix any reference made to K2 blackpearl 0807 (4.8210.2.450) or (4.8210.3.0) will equally apply to this Update.

 

 

Updated Files

Download the PDF from the right hand menu bar for a list of updated files and the associated file versions.

 


0 replies

Be the first to reply!

Reply